This cable will power your Tiffen Steadicam Volt control box from the top stage of your Steadicam sled. It comes standard with a 90-degree Anglissmo 3-Pin Lemo connector that plugs into the Volt control box and your choice of connector and sled type on the other end. All Tiffen Steadicam Volt compatible power cables are built without cable boots to minimize footprint, and are also configured with straight connectors going into the sled top stage to minimize interference with the gimbal itself.
NOTE ABOUT 90-DEGREE CONNECTORS:
We are gradually phasing out the 'FHG' style of rigid 90-degree Lemo connectors and replacing them with the newer and more desirable 'FSG' Anglissmo connectors. These newer Anglissmo connectors allow the red "index" dot on the right angle connector to be positioned to any of 8 different positions around the connector. Orientation can be changed in the field, but by default cables will ship with the index dot in the 12:00 normal position.
Disclaimer:
Engineered Cinema Solutions assumes no liability for damage to equipment due to sources with incorrect polarity or voltage. All cables are assembled according to the original manufacturer pinout configurations and are tested before shipping.
All products sold by Engineered Cinema Solutions, are in no way endorsed by or affiliated with the original manufacturers or copyrighted brand names and trademarks advertised within, nor are they intended to appear as genuine products manufactured and sold by their respective manufacturers. The use of copyrighted names and trademarks such as (but not limited to) GPI Pro Systems, Tiffen, Steadicam, MK-V, Xtended Camera Support (XCS), Preston Cinema Systems, Betz Tools, Transvideo, SmallHD, Cinetronic and other featured brands on this website is solely to indicate compatibility and constitute fair use of any such copyrighted material as provided for in Section 107 of the United States Copyright Law.
