All Steadicam Monitor Power Cables made using genuine Lemo and Neutrik components with our Canare Standard thickness cable (OD 4.2mm) for durability and flexibility.
Important note regarding Transvideo CinemonitorHD Monitors:
Please double check the "Acc" port at the back of your Transvideo CinemonitorHD. For monitors branded with a "Transvideo" logo below the screen, this will be an 8-pin 1B.308 connector. If you purchased a Transvideo CinemonitorHD as part of your Tiffen Steadicam package and the logo below the screen says "STEADICAM" please double check the "Acc" connector at the back, as this likely is a 5-pin 1B.305 connector. Please specify which monitor you have and confirm the pin configuration when ordering.
Disclaimer:
Engineered Cinema Solutions assumes no liability for damage to equipment due to sources with incorrect polarity or voltage. All cables are assembled according to the original manufacturer pinout configurations and are tested before shipping.
All products sold by Engineered Cinema Solutions, are in no way endorsed by or affiliated with the original manufacturers or copyrighted brand names and trademarks advertised within, nor are they intended to appear as genuine products manufactured and sold by their respective manufacturers. The use of copyrighted names and trademarks such as (but not limited to) GPI Pro Systems, Tiffen, Steadicam, MK-V, Xtended Camera Support (XCS), Preston Cinema Systems, Betz Tools, Transvideo, SmallHD, Cinetronic and other featured brands on this website is solely to indicate compatibility and constitute fair use of any such copyrighted material as provided for in Section 107 of the United States Copyright Law.