Power your Preston Light Ranger from the Serial port of your MDR3 or MDR4. Communication included via the same cable. Ultra-thin cable available for steadicam or gimbal operations.
Note: Your Light Ranger 2 must be factory updated to be able to receive power through the Serial port. In some cases, the LR2 will have a sticker at the back of the sensor that indicates this upgrade has been performed. As well, if you have an older MDR3, you may need to upgrade the internal fuse to be able to handle the extra current from powering the LR2 via the Serial port. If you are unsure if your LR2/MDR3 is compatible with this Power/Serial cable, please call Preston to check the update status of your LR2 and MDR3.